DPM-8062 Solvent-based Polyester Modified Silicone Resin

Overview

• DPM-8062 is a solvent-based silicone resin with a silicone content of 40%. It exhibits excellent high and low-temperature resistance as well as hydrophobic and moisture-proof properties. It also offers superior weather resistance and chemical stability. After full curing, it achieves high hardness (≥5H), high gloss, good fullness, and does not yellow at high temperatures. It possesses a high level of heat resistance.
• DPM-8062 can be used to prepare high-temperature resistant coatings, such as heat-resistant non-stick coatings for kitchen appliances, hair straightener coatings, coil coatings, and as a base resin for specialty coatings.

Typical characteristic

Item	Unit	Data
Appearance	/	Colorless transparent liquid
Solid Content	%	59±2
Acid Value	MgKOH/g	4-7
Viscosity (Tu-4 Cup)	s (seconds)	300-800
Hardness (Varnish)	H	≥5

Product features

• High hardness, high gloss, good fullness
• Excellent high-temperature performance, non-yellowing
• Excellent hydrophobic and moisture-proof performance

Application area

• High-temperature resistant coatings, hair straightener coatings, coil coatings, specialty coatings, etc.
• Baking cure. Recommended curing condition: 250℃ for 20 minutes. Can be compounded with 10% amino resin (based on the mass of 8062).
• The diluting solvent used must be free of water, sulfur compounds, pyridine, and their impurities. PMA solvent is recommended; Xylene solvent is prohibited.
• During processing, large amounts of flammable and explosive solvents will evaporate. Ensure adequate ventilation, fire prevention, and strictly eliminate ignition sources. Operators should pay attention to labor protection.
• Equipment and utensils used during processing must be clean. Strictly prevent dust, foreign matter, and water contamination.
• Acids, alkalis, organic acid salts, and amine compounds accelerate the curing of this product and affect its heat resistance and electrical properties.

Safety, Packaging and Storage

• Store in a cool, ventilated place at 5-35°C, avoiding direct sunlight, and keep in a sealed container. Under original packaging conditions, shelf life is 6 months. Prevent acid and alkali contamination, and isolate from fire and heat sources.
• Packaging: 20KG or 200KG iron drums.

Packaging Images

Price

Disclaimer：The above information is provided based on the specific characteristics of our products and is derived from existing knowledge; it is intended solely as an introduction and usage recommendation for our products and does not constitute a warranty regarding the specific characteristics of our products when used in particular applications. Therefore, we assume no responsibility for this information or recommendations.