DPM-1088  Silicone-modified aqueous polyurethane resin

Overview

• DPM-1088 Silicone-modified polyurethane resin incorporates silicone segments, endowing the coating film with excellent anti-adhesion properties and a smooth texture characteristic of silicone. This product exhibits high gloss, low surface tension of the coating film, and significantly enhances the utilization rate of release paper.

Typical Characteristic

item	data	unit	test method
Appearance	Blue-ray illuminated milky white liquid
Solid Content	30±2	%
PH	6.0-9.0		GB6920-1986
elongation at break	1100	%
viscosity	＜2500	CPS	GB/T2794-2013（BrookfieldLV,62#30rpm,25℃）
system	anion

Product Features

• Silicone accounts for 31%，Gloss level：95°
• High strength, high toughness, and high elongation at break
• The texture is smooth and feels notably substantial.
• The release paper is easily detachable, effectively improving its utilization rate.

Application Area

• Water-based leather coatings / Water-based leather texture finishes / Water-based printing pastes / Water-based textile coatings / Water-based printing inks / Water-based film coatings

Safety, Packaging and Storage

• Store in a dark, cool, and dry place at a temperature of 5–30°C, with the packaging intact. The shelf life of this product is 6 months from the date of manufacture; after 6 months, its efficacy should be confirmed by laboratory testing prior to use.
• This product requires strict protection from frost. After opening the packaging, it should be used immediately.
• Plastic packaging drums weighing 50 kg and 1000 kg

Packaging Images

Price

Disclaimer：The above information is provided based on the specific characteristics of our products and is derived from existing knowledge; it is intended solely as an introduction and usage recommendation for our products and does not constitute a warranty regarding the specific characteristics of our products when used in particular applications. Therefore, we assume no responsibility for this information or recommendations.